Custom Labels
USA Scientific Inc Tough-Spots, 1/2 inch diameter, red, on rolls
Tough-Spots, large, red labels for 1.5 mL and 2.0 mL tubes, 1/2 inch diameter, 1000/roll. For -196C to +80C.
Labelmaster Inc Do Not X-Ray Label
High-visibility warehouse ColorBrite labels instantly command attention wherever they're used. Bold lettering on these bright fluorescent chartreuse Do Not X-Ray Labels guarantee that their important message is seen and read.
Zebra Technologies Corporation Label, Paper, 2.25x0.5in (57.2x12.7mm); DT, Z-Select 4000D, High Performance Coated, All-Temp Adhesive, 1in (25.4mm) core, 4200/roll, 4/box, Plain
Label, Paper, 2.25x0.5in (57.2x12.7mm); DT, Z-Select 4000D, High Performance Coated, All-Temp Adhesive, 1in (25.4mm) core, 4200/roll, 4/box, Plain
Andwin Scientific Laser Cryo-Babies 1.28x0.50inch, for 1.5ml tubes, White, 1700/pk
Cryogenic labels formatted for laser printers. Laser Cryo-Babies 1.28x0.50inch, for 1.5ml tubes, White, 1700/pk
Ted Pella Inc ELCO Tabs™, Carbon Conductive Tabs, 25mm OD, 54/pk
The simplicity of application and smooth, clean surfaces of PELCO Tabs™ Carbon Conductive Tabs are a significant improvement compared to many of the other common adhesives that have been used in SEM mounting. Both tab sides have a thick conductive adhesive (conductive inner tab is 35µm and the adhesive is 45µm on each side for a total thickness of 125µm [5 mils]) with a liner on both sides, a transparent liner and white liner respectively. They are ready for immediate use. The top protective liner does not have to be removed until the sample is ready to be mounted. This reduces possible contamination. Outgassing is negligible. The PELCO Tabs™ consist of a carbon fiber mat impregnated with a conductive adhesive. There is no internal carrier film. The conductive adhesive is a carbon filled acrylic, free of solvents. It can be removed from the specimen mount with ethyl acetate, ethanol, isopropanol, alcohols or our 3M™ Adhesive Remover 80924 which is solvent-free.
HCL Labels WRITE IN GHS 3X5 100/PK
For Research & Development (R&D) and Academic Labs Only - Write-in GHS Label - 3" x 5" Kimdura With Matte Lamination (Pack of 100) Matte lamination allows for easy writing on the label.These labels are not suitable for production associated laboratories that are required to comply with OSHA's Hazard Communication standard (29 CFR 1910.1200).Perfect for enhancing your Laboratory Safety Program’s labeling system. Complements any “Chemical Hygiene Plan” and “Good Laboratory Safety Practices.” These labels are ideal for identifying chemicals, products, and solutions placed in secondary containers, e.g., beakers, bottles, HPLC solvent containers.IMPORTANT NOTE: These type of labels are for laboratories exempted from complying with OSHA Hazard Communication standard (CFR 29, 1910.1200) but still required to develop and implement a Chemical Hygiene Plan (29CFR 1910.1450). This label design is copyright protected.
GA International Stain-Proof Xylene-Resistant Labels 0.875" x 0.875" / 22.2mm x 22.2mm Rectangle White From -80°C to +149°C (-112°F to +300°F)
Thermal-transfer printable labels designed for microscope slides. These highly glossy labels repel stains and do not acquire colors from histological stains, such as hematoxylin or eosin. The labels and printed information are xylene-resistant when used in combination with our XAR-class of solvent-resistant ribbons. The print will resist xylene, toluene, alcohol, MEK, and other solvents and chemicals without needing additional protection. Ideal for histology lab applications.
Shamrock Scientific Date Received____Do Not Use This Lot Number' Signal Label, 500/roll
Date Received____Do Not Use This Lot Number' Signal Label, 500/roll.
Zebra Technologies Corporation Label, Paper, 1.1875x0.8438in (30.2x21.4mm); DT, Z-Select 4000D, High Performance Coated, All-Temp Adhesive, 1in (25.4mm) core, 2710/roll, 6/box, Plain
This item has a minimum order quantity of 6 per supplier requirements
Label, Paper, 1.1875x0.8438in (30.2x21.4mm); DT, Z-Select 4000D, High Performance Coated, All-Temp Adhesive, 1in (25.4mm) core, 2710/roll, 6/box, Plain
Uline Magnetic Labels on a Roll - Perforated, 2"" x 6"" x 100'
Easily relocate labels when you move inventory. Reusable - Wet cloth wipes off writing from vinyl surface. Pre-scored to popular lengths.
GA International Removable Deep-Freeze Labels for Thermal-Transfer Barcode Printers 2" x 1" / 50.8mm x 25.4mm Rectangle White From -80°C to +100°C (-112°F to +212°F)
Deep-freeze, removable barcode labels for vials, tubes, as well as polypropylene and cardboard boxes. The freezer labels have a strong, glove-friendly adhesive that allows them to adhere firmly to containers in (-20°C, -40°C, -80°C) freezers and dry ice while still being easily removable at room temperature without leaving behind any residue.Waterproof and tearproof, these removable deep-freeze labels can also withstand temperatures ranging up to +100°C, making them suitable for general lab use such as the identification of beakers, flasks, boxes, plastic and glass bottles that are stored in fridges and freezers.
Labelmaster Inc Dry Ice Label, Paper, Roll of 500
Labelmaster’s paper, 6" x 6" Worded Dry Ice Labels have UN1845 Dry Ice preprinted on them. There are blanks to fill in your dry ice quantity, the shipper's name and the consignee. These Worded Dry Ice Labels meet the design and durability standards of 49 CFR, ICAO and other international air regulations. The Hazard Class 9 labels can help you stay in compliance with standards set forth by the DOT. Hazmat labels are printed with light-fast inks for high durability, and adhesives are formulated for use in various climates and environments.